Silencer Seaming Machine
 |
For clinching (seaming) tail plates of automotive silencers / mufflers. |
|
Semi-automatic operation controlled by a simple PLC. |
|
Seaming done in 2 stages using 2 pairs of rollers, 1st pair for inward bending and 2nd pair for final pressing. |
|
Seamer system is cam based and fully mechanical for consistent seam quality and repeatability. |
|
Heavy-duty construction. |
|
Positive clamping system to ensure rigidity of muffler during seam operation. |
Description of Operation The silencer / muffler is placed on the support and is held vertically by means of a non-contact magnet. The dual push buttons are pressed to begin the operation. The silencer is pneumatically clamped and the seam operation is started automatically. After completion, the seaming head is stopped and the muffler is de-clamped for unloading.
The sequence is controlled by a simple PLC (Programmable Logic Controller).
|
SPECIFICATIONS
|
| Cycle Time |
20 Seconds (Incl loading & unloading) |
| Min./Max. Can Dia. |
60/180 mm (2.4/7.0 in.) |
| Max. Can/Drum Length |
As Required |
| Max. Sheet Thickness |
1 mm (0.04") |
| Motor Power |
3 HP / 5 HP (depending on thickness) |
|
Air required (SRS:320:FTR:PN)
|
2.5 Bar-200 lts./min. |
| Net Weight |
1400 Kgs. (2800 lbs.) |
| Gross Weight |
1800 Kgs. (3900 lbs.) |
| Case Dimensions |
1320 x 950 x Ht (52 x 37 x ht.) |
|
